EVGA Precision XOC
Unlock the Power of Pascal
The next generation of EVGA PrecisionX has arrived with EVGA Precision XOC. This new version of Precision is built for the NVIDIA Pascal architecture and combines the best of EVGA Precision and EVGA OC Scanner to give you never before seen overclocking features and built in automatic overclock tuning.
Exclusive features for EVGA GeForce GTX 1080/1070! This features will automatically enable on an EVGA graphics card:
- DirectX 12 OSD Support – See the on screen display on DirectX 12 games.
- EVGA OC ScannerX Integration – Automatically find your optimal voltage/frequency curve!
- K-Boost Function – Maximize your clocks with this exclusive feature.
- RGB LED control (on EVGA GeForce GTX 1080 FTW)
- Full support for NVIDIA GeForce GTX 1080, with new GPU Boost 3.0 Features
- Dynamically set independent voltage/frequency points for ultimate control
- Linear mode gives you one click overclocking
- Use the Scan mode to find the optimal voltage/frequency curve for your card!
- Full support for Microsoft DirectX 12 (EVGA card required)
- OSD interface with RGB color support
- GPU, Memory and Voltage Control
- Custom Fan Control/Fan Curve
- Profiling system allowing up to 10 profiles with hotkey
- In game screenshot hotkey supports BMP and JPG
- Much more!
- GeForce GTX 1080/1070 (EVGA card required for full versions)
- Microsoft Windows 10, 8.1, 8, 7, Vista
Download Precision XOC
Download the latest version of EVGA Precision XOC (6.2.3) here.
EVGA PRECISION XOC LICENSE AGREEMENT
© 2016 EVGA Corporation. All Rights Reserved.
This License Agreement is for Customer’s use of EVGA Precision XOC Software (the “Software”) and for any associated printed materials (the "Documentation" and, collectively with the Software, the “Licensed Materials”). The Software is licensed to Customer under this License Agreement by EVGA Corporation (“EVGA”) solely for use with EVGA’s VGA cards 10 series or higher (the “Corresponding VGA Cards”). This License Agreement sets forth the terms and conditions of use of the Software only (and not of the Corresponding VGA Cards).
By clicking to accept or agree to this License Agreement when downloading or installing the Software, you agree to comply with and be bound by this License Agreement. If you do not agree to this License Agreement, you must not install or use the Licensed Materials. If the individual clicking to accept or agree to this License Agreement is doing so on behalf of a corporation or other entity who has purchased or obtained a Corresponding VGA Card, then you (the individual) represent and warrant that you have authority to bind such entity as the “Customer” hereunder and enter into this License Agreement on its behalf. If the individual clicking to accept or agree to this License Agreement is not doing so on behalf of such an entity, then “Customer” refers to you (the individual).
1. GRANT OF LICENSE
EVGA hereby grants Customer the non-exclusive, non-transferable, non-sublicensable right to (a) install the Software on one or more computers that incorporate one or more Corresponding VGA Cards, (b) use the Software solely with such Corresponding VGA Cards (and not with other graphics cards), and (c) make a reasonable number of back-up copies of such Software, subject to the below express restrictions and the other terms and conditions of this License Agreement. Customer may also use and make a reasonable number of copies of the Documentation solely for Customer’s personal or internal use as applicable.
2. RESTRICTION ON USE
Customer shall not:
- (a) reverse engineer, decompile, or disassemble the Software; attempt in any other manner to obtain or derive the source code of, or any algorithms contained in, the Software; or attempt to disable any security devices or codes incorporated in the Software;
- (b) modify, adapt or create derivative works of the Licensed Materials, or any portion therefore;
- (c) reproduce or copy the Licensed Materials, except as expressly permitted in Section 1 above;
- (d) distribute or transfer the Licensed Materials to any other person;
- (e) use the Software for any commercial use, utilization and distribution, including but not limited to public demonstration or overclocking event, etc.; and
- (f) separate any component part(s) of the Software for use on more than one computer, or otherwise used separately from the other parts.
3. INTELLECTUAL PROPERTY
Other than the express limited licenses granted hereunder, EVGA and its licensors retains all rights, title, and interest in the Licensed Materials, including in all rights in copyrights, patents, trademarks, trade secrets and other intellectual property rights underlying or covering the Licensed Materials. Customer shall not alter, remove, or obscure any printed or displayed legal notices contained on or in copies of the Software. The Software is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties.
4. LIMITATION OF LIABILITY
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND EVGA AND ITS AFFILIATES DISCLAIM ALL WARRANTIES OF ANY KIND OR NATURE, WHETHER EXPRESS, IMPLIED, OR STATUTORY, RELATING TO OR ARISING FROM THE SOFTWARE, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT. Without limiting the foregoing, Customer acknowledges and agrees that Customer is solely responsible for (a) verifying that the Software is being used with a Corresponding VGA Card of the appropriate version and model number, on a compatible computer and operating system; and (b) ensuring that any configuration or setting changes Customer makes to the Corresponding VGA Cards, including GPU clock offsets, memory clock offsets, fan speed, and voltage, are within manufacturer’s recommended ranges and safety and tolerance specifications. EVGA shall have no obligation or liability for damage to the Corresponding VGA Cards, any other video cards, or any computer due to changes Customer elects to make with the Software to such hardware’s settings.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EVGA OR ITS AFFILIATES BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, LOSS OF DATA, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF EVGA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Customer’s licenses and rights under this License Agreement shall terminate immediately upon Customer’s breach of any of the terms or conditions of this License Agreement. Upon any termination of this License Agreement or the licenses granted hereunder, Customer must destroy all copies of the Licensed Materials. Sections 2, 3, 4 and 6 shall survive any termination of this License Agreement or the licenses granted hereunder.
In addition, if Customer commences or participates in any legal proceeding against EVGA, then EVGA may, in its sole discretion, suspend or terminate all license grants and any other rights provided under this License Agreement during the legal proceedings.
If any provision of this License Agreement is inconsistent with, or cannot be fully enforced under, applicable law, such provision will be construed as limited to the extent necessary to be consistent with and fully enforceable under the law. This License Agreement is the final, complete and exclusive License Agreement between the parties relating to the subject matter hereof, and supersedes all prior or contemporaneous understandings and agreements relating to such subject matter, whether oral or written. This License Agreement may only be modified in writing. Customer agrees that it will not ship, transfer or export the Software into any country or to any individual prohibited by any applicable export laws, restrictions or regulations. This License Agreement shall be construed pursuant to and governed by the laws of the State of California, without regard to its conflict of laws rules. The United Nations Convention on Contracts for the International Sale of Goods is specifically disclaimed
EVGA Precision X Version History
- Adds LED SYNC startup with Windows Function
- LED SYNC will minimize to taskbar on close
- Various other bug fixes
- Adds support for GeForce GTX 1070 Ti
- Adds new feature "EVGA LED SYNC" – Allows you to sync the lighting on EVGA RGB components! (CLC, GPU, Chassis)
- Adds new feature "EVGA Precision XOC Scanner" – A new and easy way to auto overclock your EVGA GeForce GTX 1070 Ti
- Adds auto update function
- Fix LED issue on 1080 Ti FTW3 HYBRID
- Make OC Scanner Manual Mode VF Curve Smooth
- Various Other Bugfixes
- Disable F1 Help function in all dialogs.
- Fix KINGPIN skin "TEMP TARGET" unit error.
- Adds new KINGPIN skin. You can select the new skin from Settings > Interface > Select Skin
- Fix OSD font size and position not working in some 64bit applications.
- Fix Power Target is not correct when switching BIOS's on dual BIOS graphics cards.
- Fixes 1080 Ti FTW3 crash resulting from v6.1.12.
- Fix power & memory fan swap in software fan curve control.
- Fix power & memory fan swap in hardware monitor.
- Fixed issue where custom fan curve settings were not activating at desired temperature/fan threshold.
- Fix multimedia keys causing OSD to function incorrectly.
- OSD items now group, saving screen space
- OSD size and position settings are added in PXOC OSD settings
- Updated exclusion list
- Screen capture now supports PNG format
- GPM color now changes immediately
- Voltage slider now has button
- Performance optimizations
- Various bugfixes
- Optimized EVGA GeForce GTX 1080 Ti FTW3 Support
- Support FTW3 fan control and backplate logo led.
- Support GPU/Power and GPU/Memory fan sync function.
- Support Fan curve for 3 fans.
- Backplate logo led support LED Visualizer / Static On / Static Off / Follow Badge Color modes.
- Adds support for EVGA GeForce GTX 1080 Ti SC2/SC Black
- Fixes framerate limiter issue
- Fixes power fan profile bug
- Adds full support for EVGA iCX Technology. To learn more about EVGA iCX Technology visit www.evga.com/icx
- Update LED descriptions
- Fix S3/S4 resume error
- Various other fixes
- Add support for adjusting OSD font size. (Access through Precision XOC Server application)
- Add origin.exe to OSD exclude list
- Add pixel clock adjustment up to 144Hz
- Fix Battlefield 1 OSD crash when changing resolution
- Add support for GeForce GTX 1050 and 1050 Ti
- Fix fan curve profile switch fail on hotkey
- Fix Precision XOC Servers block EVGA K-Boost
- Resume OC Scanner VR curve after OC Scanner crash
- Add more programs to OSD exclude list
- Disable functions that can cause system crash while OC Scanner is running
- Fix V/F Curve error if primary PCI-E slot is not used.
- Change "Shadowplay" button to "Share".
- Add Battle.net to OSD exclusion list.
- Minor naming updates.
- Serial number on first bootup now optional.
- OC Scanner page now will not show if not supported.
- Fix profiles not working on non-10 series cards.
- Fix GPU info does not match when changing GPU.
- Add LED control for K|NGP|N cards.
- Add overvoltage and overboost function for supported cards (In settings).
- Add GPU name display for GTX 10 series cards.
- Now supports ALL NVIDIA cards!
- Adds support for TITAN X (Pascal)
- Fix crash with 22 CPU cores
- Fix crash on LED control if card does not have hardware LED
- Add "setpoint.exe" to the OSD exclude list
- RGB color values now save to firmware
- Improve bootup speed
- Change GPU clock offset to set in 1MHz increments
- Fix 2D/3D profile crash issue
- Fix SLI GPU order incorrect
- Various UI improvements
- Add support for GeForce GTX 1060
- Add antialiasing on OC Scanner
- Fix profile not saving correctly
- Improve startup time
- Fix GPU offset incorrect after switching GPU
- Fix bug related to KBoost and incorrect VF curve
- Fix issue with OCScanner starting by itself
- Correct VF points on OC basic mode to match GPU clock
- Fix framerate target error
- Framerate target max increase to 144Hz
- Fix VF curve data incorrect when switching GPU
- Fix invalid fan curve showing when switching GPU
- Fix VF curve editor crash when switching GPU
- Fix power and target voltage set incorrectly when closed
- Change setting dialog to always be on top
- Fix GPU voltage not showing in hardware monitor
- Check VF curve clock offset range to avoid out of spec
- Restore power target and voltage after OC Scan complete
- Fix GPU clock offset not saving to profiles
- Fix voltage going to 100% after switching profiles
- Cancel OC scanner if click default
- Save LED status into profile
- Fix V/F control on Non-EVGA Card
- Add LED control for 1080 FTW
- EVGA Precision XOC Release